Since one advantage of the TH-UV8000D radio is that it comes with a higher performance (and longer) gain antenna, try using the low power setting when using the cross-band repeat function whenever possible.
their mobile radio counterparts that have both a larger heat sink and a fan for cooling), so it's highly recommended that you keep your cross-band transmissions as short in duration as possible and NOT use high power unless absolutely necessary. Instantly re-transmitted on your selected UHFįourth, hand-held radios do not have cooling fans (just a relatively small heat sink vs. Heard on your selected VHF frequency will be V4 of the TYT TH-UV8000D radio will operate inīoth directions automatically, meaning that a signal Third, the cross-band repeat function in the new Separation to accomplish the same task (plus itĬosts a lot less and removes many pounds of Radio designers use many MHz of frequency Hand-held radio like the TYT TH-UV8000D, so the Picture on right) that's just not feasible in a small KHz apart on VHF (using expensive receiverĬavities to separate the two close-by signals, see Have transmit and receive frequencies just 600 Repeater costing several thousand dollars can Several MHz of separation between the transmitĪnd receive frequencies in order to performĬorrectly, so while an expensive commercial
To ensure that each unit has been tested prior to shipment, we record each radio's serial number after testing and before shipment to the customer.Ĭommunications, a cross-band repeater needs
First, not all TYT TH-UV8000D radios have the cross-band repeat function supported in the radio's firmware (all current versions shipped by RF Gear 2 Go have been tested by us prior to shipment to ensure that you get the latest radio firmware, thus allowing the cross-band repeater function to work).